I believe it works but just have no idea how to fully test- For that reason – Sold AS IS. Powers on and red lights work and I finally got the bright dot to show up on the screen and move from right to left and up and down.
Model: 2C23T. Oscilloscope Specifications. Singal Generator. Function Signal Generator Specifications. Battery: 3000mAh lithium battery. hope you could understand. 2.Dual-channel 2X10MHz bandwidth, isolated channels are independent of each other to avoid interference between them, more accurate signal detection.
Hantek Digital DSO2000 series Oscilloscope 2CH+1CH 1GSa/s 100/150MHz 25MHz AWG Features: 1) 2 channels which are respectively controlled by independent knobs 2) 100 MHZ and 150MHZ analog channel bandwidth 3) Sampling rate up to 1 GSa/s 4) 8M memory depth 5) Vertical range 2mV/div ~ 10V/div 6) Built-in 1 CH 25MHz waveform generator (Only DSO2D10, DSO2D15) 7) Vertical resolution: 8bit 8) Trigger: Edge, Pulse, Video, Slope, Overtime, Window, Pattern, Interval, Under Amp, UART, LIN, CAN, SPI, IIC 9) BUS decode and protocol analysis: RS232/UART, I2C, SPI, CAN, LIN 10) Can save multiple data formats, such as settings, waveforms, reference waveforms, CSV, pictures 11) A 3-digit digital voltage meter and a 6-digit hardware frequency indicator 12) 32 kinds of auto measurements with statistics, real-time statistics of maximum, minimum, standard deviation and etc. 13) 2 sets of digital voltmeters 14) Support threshold testing, free measurements within the screen 15) Abundant SCPI remote command control 16) USB Host/Device.
[Oscilloscope] 10MHz bandwidth, 48MSa/s sampling rate. Specification of oscilloscope. 48M sampling rate 10M bandwidth. [Signal Generator] 13 kinds of waveform output. [Signal Generator] Specification.
Hantek Digital DSO2000 series Oscilloscope 2CH+1CH 1GSa/s 100/150MHz 25MHz AWG Features: 1) 2 channels which are respectively controlled by independent knobs 2) 100 MHZ and 150MHZ analog channel bandwidth 3) Sampling rate up to 1 GSa/s 4) 8M memory depth 5) Vertical range 2mV/div ~ 10V/div 6) Built-in 1 CH 25MHz waveform generator (Only DSO2D10, DSO2D15) 7) Vertical resolution: 8bit 8) Trigger: Edge, Pulse, Video, Slope, Overtime, Window, Pattern, Interval, Under Amp, UART, LIN, CAN, SPI, IIC 9) BUS decode and protocol analysis: RS232/UART, I2C, SPI, CAN, LIN 10) Can save multiple data formats, such as settings, waveforms, reference waveforms, CSV, pictures 11) A 3-digit digital voltage meter and a 6-digit hardware frequency indicator 12) 32 kinds of auto measurements with statistics, real-time statistics of maximum, minimum, standard deviation and etc. 13) 2 sets of digital voltmeters 14) Support threshold testing, free measurements within the screen 15) Abundant SCPI remote command control 16) USB Host/Device.
Unit has some Velcro on top, it has some age so there is signs of old tags or tape residue on the body. Screen looks good and the buttons and knobs seem smooth and functional shipping is free!
OWON HDS272 3.5″ LCD 2CH Handheld Oscilloscope 70MHz Bandwidth 20000 Counts Multiumeter OSC + DMM for Automobile Maintenance and Power DetectionFeatures: ●Oscilloscope + multimeter + waveform generator, multifunction in one●3.5-inch high-resolution, high-contrast color LCD display, suitable for outdoor use●18650 lithium battery, comprehensive power consumption≤3W, can work continuously for about 6 hours●USB Type-C interface, support power bank, support PC software connection●Self-calibration function●SCPI supported, facilitate secondary development Specifications:Oscilloscopes ModelHDS242HDS272HDS242SHDS272SBandwidth 40MHz 70MHz 40MHz 70MHz Channels 2- CH Oscilloscope2-CH Oscilloscope+1-CH Generator Sample Rate 125MSa/s Acquisition Model Normal, Peak detectRecord Length8KDisplay3.5 -inch LCDWaveform Refresh Rate10,000 wfrms/sInput Coupling DC, AC, and Ground Input Impedance 1 MΩ+2%, in parallel with 1 6pF+10pF Probe Attenuation Factors 1X,10X,100X,1000X Max. input Voltage400V (DC+AC, PK PK, 1MΩ input impedance)(10:1 probe attenuation)Bandwidth Limit (typical) 20MHz Horizontal Scale 5ns/div – 500s/div, step by 1-2- 5 Vertical Sensitivity 10mV/div – 10V/div Vertical Resolution 8 bits Trigger Type Edge Trigger Modes Auto, Normal, single Automatic MeasurementFrequency, Period, Amplitude, Max, Min, Mean, PK-PK Cursor Measurement△V, △T, △T&△V between cursors Communication InterfaceUSB Type-C Multimeter (Standard) Max. Resolution 20,000 countsTesting Mode Voltage, Current, Resistance, Capacitance, Diode ,and Continuity test Input Impedance 10MΩ Max Input VoltageAC 750V, DC 1000V Max Input Current DC: 10A AC: 10A Diode 0- 2V Waveform Generator (Only for HDS242S & HDS272S) Frequency Output Sine 0.1Hz – 25MHz Square 0.1Hz – 10MHz Ramp 0.1Hz – 1MHz Pulse 0.1Hz – 5MHz Arbitrary 0.1Hz – 5MHz Sampling Rate 125MSa/s Channel 1-CH Amplitude Range 20mVpp-5Vpp Waveform Length 8K Vertical Resolution 14bits Output Impedance 50Ω Package includes: 1 x Main device1 x Bag1 x Probe1 x Power Plug(EU type)1 x Probe Adjust1 x USB Cable2 x Multimeter Leads1 x Instructions1 x CD Rom1 x BNC to Alligator ClipDetails picture:
THIS IS A WORKING HP 54600B 100MHZ O’SCOPE Important information if it is not shown in the picture then it probably does not come with the item Usually Power cord and connector cords are not included please email me if you have a question before purchasing. SHIPPING QUOTED IS FOR THE LOWER 48 STATES PLEASE EMAIL ME FOR A QUOTE Paypal Is accepted All Items will be shipped out within 48 hours of purchase if it is a item that must be palletized I need a commercial address and phone number. If you have any problems with the item please email us so we can work the problem out Thank You For Looking At Our Item18 BIN 320, 318
ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
0,50mm (4,50 kg/m²)
LARGURA – 1.050 mm
TELHA + TELHA EPS 30mm + TELHA
ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
0,50mm (4,50 kg/m²)
LARGURA – 1.050 mm
TELHA + TELHA EPS 30mm
ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
0,50mm (4,50 kg/m²)
LARGURA – 1.050 mm
TELHA + TELHA EPS 30mm
ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
0,50mm (4,50 kg/m²)
LARGURA – 1.050 mm
TELHA + TELHA EPS 30mm + FILME ACARTONADO
ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
0,50mm (4,50 kg/m²)
LARGURA – 1.050 mm
ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
0,50mm (4,50 kg/m²)
LARGURA – 1.050 mm
ESPESSURAS – 0,43mm e 0,50mm
DIMENSÕES – 1.250 mm X 2.000 mm
1.250 mm X 3.000 mm
ESPESSURAS – 0,43mm e 0,50mm
DIMENSÕES – 1.250 mm X 2.000 mm
1.250 mm X 3.000 mm
ESPESSURAS – 0,43mm e 0,50mm
DIMENSÕES – 200 / 300 / 350 / 400 / 500 / 600 / 800 / 900 / 1.200
COMPRIMENTOS – 42m / 84m
