Variable

ONSET HOBO MX1105 Bluetooth 4-Channel Analog Data Logger

This is a used, but “like new” mx1105. It was pulled from working equipment, and it was functional. It includes 4 channel cables that plug into the device with a 3 pin jst style connector on the other end. Two of the four are data, and two are the power. The batteries will be removed for shipping. This device was displaying temperature and other information before removal. The device that these were monitoring is no longer utilized, and it was only used for approximately 2-3 days max. power cable

Read More...

5 PCS 1/4″ 4 FLUTE VARIABLE HELIX CARBIDE END MILL – .015 RADIUS – TiALN

SET OF 5 PCSMADE IN USA1/4″ 4 FLUTE VARIABLE GEOMETRY SOLID CARBIDE END MILLTiALN COATEDVARIABLE HELIXIRREGULAR FLUTE SPACING.015 CORNER RADIUS3/4″ LENGTH OF CUT2-1/2″ OVERALL LENGTH1/4″ SHANK DIAMETERPOLISHED SHANK High performance endmills at manufacturer direct pricing. Buy with confidence. Made in USAusing premium 10% cobalt micrograinmaterial on our CNC grinders. Whypay more for a brand name? Our endmills are as good or better at much lower prices. Free shipping on orders over $250.

Read More...

Rings Countersunk N52 Super Strong Rare Earth Neodymium Magnet North South Poles

N52 Super Strong Neodymium Magnets Rings and Countersunk Rings General Specifications:Plating/Coating: Ni-Cu-Ni (Nickel) Magnetization Direction: Axial (Poles on Flat Ends)Max Operating Temp: 176ºF (80ºC) Material Features: Neodymium Magnets are made of a brittle material (NDFEB). These magnets are not as strong as steel, they are more like a brittle ceramic. If you let two magnets slam together, they can crack and break, this is true for magnets large and small. Countersunk Magnets : Ring 5x3mm Hole 2mm N52 (countersunk to N or S Pole):Diameter 5mm X 3mm thick Hole 2mm (approx. 3/16″ x 1/8″ Hole 5/64″) | Pull Force: Approx. 0.94 lb Ring 6x3mm Hole 2mm N52 (countersunk to N or S Pole):Diameter 6mm X 3mm thick Hole 2mm (approx. 1/4″ x 1/8″ Hole 5/64″) | Pull Force: Approx. 1.36 lb Ring 7x4mm Hole 2mm N52 (countersunk to N or S Pole):Diameter 7mm X 4mm thick Hole 2mm (approx. Dia 9/32in x 5/32in hole 5/64″) | Pull Force: Approx. 3 lb Ring 8x3mm Hole 3mm N52 (countersunk to N or S Pole):Diameter 8mm X 3mm thick Hole 3mm (approx. Dia 1/3″ x 1/8″ thick Hole 1/8″) | Pull Force: Approx. 3.45 lb Ring 10x3mm Hole 3mm N52 (countersunk to N or S Pole):Diameter 10mm X 3mm thick Hole 3mm (approx. Dia 3/8″ x 1/8″ thick Hole 1/8″) | Pull Force: Approx. 3.5 lb Ring 12x3mm Hole 3mm N52 (countersunk to N or S Pole):Diameter 12mm X 3mm thick Hole 3mm (approx. Dia 1/2″ x 1/8″ thick Hole 1/8″) | Pull Force: Approx. 5.75 lb Ring 12x5mm Hole 4mm N52 (countersunk to N or S Pole):Diameter 12mm X 5mm thick Hole 4mm (approx. Dia 1/2″ x 3/16″ thick Hole 5/32″) | Pull Force: Approx. 7.5 lb Ring 15x3mm Hole 3mm N52 (countersunk to N or S Pole):Diameter 15mm X 3mm thick Hole 3mm (approx. Dia 19/32″ x 1/8″ thick Hole 1/8″) | Pull Force: Approx. 8.5 lb Ring 15x4mm Hole 4mm N52 (countersunk to N Pole):Diameter 15mm X 4mm thick Hole 4mm (approx. Dia 19/32″ x 5/32″ thick Hole 5/32″) | Pull Force: Approx. 10.5 lb Ring 18x3mm Hole 3mm N52 (countersunk to N or S Pole):Diameter 18mm X 3mm thick Hole 3mm (approx. Dia 45/64″ x 1/8″ thick Hole 1/8″) | Pull Force: Approx. 10.5 lb Ring 20x3mm Hole 3mm N52 (countersunk to N or S Pole):Diameter 20mm X 3mm thick Hole 3mm (approx. Dia 25/32″ x 1/8″ thick Hole 1/8″) | Pull Force: Approx. 11.5 lb Ring 20x5mm Hole 5mm N52 (countersunk to N or S Pole):Diameter 20mm X 5mm thick Hole 5mm (approx. Dia 25/32″ x 3/16″ thick Hole 3/16″) | Pull Force: Approx. 19 lb Ring 25x3mm Hole 4mm N52 (countersunk to N or S Pole):Diameter 25mm X 3mm thick Hole 4mm (approx. Dia 1″ x 1/8″ thick Hole 5/32″) | Pull Force: Approx. 13.5 lb Ring 25x5mm Hole 5mm N52 (countersunk to N or S Pole):Diameter 25mm X 5mm thick Hole 5mm (approx. Dia 1″ x 3/16″ thick Hole 3/16″) | Pull Force: Approx. 26.5 lb Ring 50x5mm Hole 6mm N52 (countersunk to N Pole):Diameter 50mm X 5mm thick Hole 6mm (approx. Dia 2″ x 3/16″ thick Hole 1/6″) | Pull Force: Approx. 45 lb Magnet Rings:Ring 7x4mm Hole 2mm N52:Diameter 7mm X 4mm thick Hole 2mm (approx. Dia 3/8″ x 1/8″ thick Hole 1/8″) | Pull Force: Approx. 3 lb Ring 12x5mm Hole 4mm N52:Diameter 12mm X 5mm thick Hole 4mm (approx. Dia 1/2″ x 3/16″ thick Hole 5/32″) | Pull Force: Approx. 7.5 lb Ring 15x4mm Hole 4mm N52:Diameter 15mm X 4mm thick Hole 4mm (approx. Dia 19/32″ x 5/32″ thick Hole 5/32″) | Pull Force: Approx. 10.5 lb Ring 32x5mm Hole 5mm N52:Diameter 32mm X 5mm thick Hole 5mm (approx. Dia 1.26″ x 3/16″ thick Hole 3/16″) | Pull Force: Approx. 30 lb Ring 38x5mm Hole 5mm N52:Diameter 38mm X 5mm thick Hole 5mm (approx. Dia 1.5″ x 3/16″ thick Hole 3/16″) | Pull Force: Approx. 34 lb WARNING! The neodymium magnets we sell are extremely strong, and must be handled with care to avoid injury and damage. Fingers can get severely pinched between two attracting magnets. Neodymium magnets are brittle, and can peel, crack or shatter if allowed to slam together. Eye protection should be worn when handling these magnets, because shattering magnets can launch pieces at great speed.The strong magnetic fields of these magnets can damage magnetic media such as floppy discs, credit cards, magnetic ID cards, cassette tape, videotapes and similar items. They can also damage televisions, VCRs, computer and CRT monitors and other electronics. Never place neodymium magnets near any of these items.Children should not be allowed to handle neodymium magnets, as they can be dangerous. These magnets are not toys. Small magnets risk a chocking hazard and should never be swallowed or inserted into any part of the body. Never allow neodymium magnets near a person with a pacemaker or similar medical devices. The strong magnetic fields can affect the operation of such devices.Neodymium magnets are brittle and prone to chipping and cracking. They do not take kindly to machining. Neodymium magnets should never be burned, as burning them will create toxic fumes.————————————————-Shipping:Free standard shipping for all USA orders We ship from Brooklyn New York

Read More...
Telhas Termoacústicas

TELHA SANDUÍCHE

Aluzinco / Galvalume

ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
              0,50mm (4,50 kg/m²)

LARGURA – 1.050 mm

TELHA + TELHA EPS 30mm + TELHA

Telhas Termoacústicas

TELHA FACE TELHA

Aluzinco / Galvalume

ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
              0,50mm (4,50 kg/m²)

LARGURA – 1.050 mm

TELHA + TELHA EPS 30mm

Telhas Termoacústicas

TELHA FACE LISA

Aluzinco / Galvalume

ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
              0,50mm (4,50 kg/m²)

LARGURA – 1.050 mm

TELHA + TELHA EPS 30mm

Telhas Termoacústicas

TELHA FACE LISA com filme

Aluzinco / Galvalume

ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
              0,50mm (4,50 kg/m²)

LARGURA – 1.050 mm

TELHA + TELHA EPS 30mm + FILME ACARTONADO

Telhas TP40 de Qualidade

TELHA TRAPEZOIDAL TP40

Aluzinco / Galvalume

ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
              0,50mm (4,50 kg/m²)

LARGURA – 1.050 mm

Telhas TP40 de Qualidade

TELHA ONDULADA

Aluzinco / Galvalume

ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
              0,50mm (4,50 kg/m²)

LARGURA – 1.050 mm

Chapas de Qualidade

CHAPA ZINCADA

Zincada

ESPESSURAS – 0,43mm e 0,50mm
DIMENSÕES – 1.250 mm X 2.000 mm
                         1.250 mm X 3.000 mm

Chapas de Qualidade

CHAPA ALUZINC / GALVALUME

Aluzinco / Galvalume

ESPESSURAS – 0,43mm e 0,50mm
DIMENSÕES – 1.250 mm X 2.000 mm
                         1.250 mm X 3.000 mm

Chapas de Qualidade

BOBININHAS E SLITTERS

Aluzinco / Galvalume e Zincadas

ESPESSURAS – 0,43mm e 0,50mm
DIMENSÕES – 200 / 300 / 350 / 400 / 500 / 600 / 800 / 900 / 1.200
COMPRIMENTOS – 42m / 84m