Ace Belt Driven Centrifugal Pump 20-Spline 1.25″ Suction x 1″ Discharge @ 65 GPM
The original belt drive standard since 1964. Time tested and field proven design. Widespread parts and service availability. Most Economical belt drive. 20 spline 1-3/4″ (44.5 MM) split bore shaft with locking collar for larger 1000 RPM PTO Models. Port sizes: Inlet 1-1/4″ NPT, Outlet 1″ NPT. Max Pressure: 80 PSI Max Flow: 65 GPM Weight: 45 lbs Our eBay Store About Us Contact Us Add to Favorite Sellers Ace Belt Driven Centrifugal Pump 20-Spline 1.25″ Suction x 1″ Discharge @ 65 GPM 899.95 PTOC-1000-20SP Suction 1-1/4″ Female Pipe Thread Discharge 1″ Female Pipe Thread Chemical Resistant Valox Impeller Standard Viton Carbon/Ceramic Mechanical Seal Spring loaded idler absorbs shock of PTO engagement New BAC-15-PIN feature ensures proper alignment Cast iron centrifugal with for direct mount on 20 spline, 1-3/4″, 1000 RPM PTO Shaft Maximum Gallons Per Minute – 65 GPM Maximum PSI – 80 PSI Do Not Run Dry – Seal damage will result from running dry. Impeller damage may also occur if run dry for an extended period. Do Not Run With Flow Shutoff For Extended Periods – Running the pump with no flow for extended periods of time will result in excessive heat and pump failure. A continuous bypass is recommended for low flow applications
