Peça um orçamento
Facebook-f Instagram

Pistol

P-Style – OWB Holster Belt Loops – w/SPUMA Mounting Hardware Included – 2 Pack

10/08/2026

P-Style – OWB Holster Belt Loops – w/SPUMA Mounting Hardware Included – 2 Pack These are P-Style OWB (outside-the-waistband) BDC belt loops. They are universal in design and will work on almost any rig. They feature (2) mounting holes and can be affixed with either a post and screw assembly, or with #8 eyelets. They will adapt to almost any placement. This value-priced combo is the 2-pack with mounting hardware included. Each P-Style Belt Loop comes with (2) AV-SP-250-BK slotted posts, (2) Oval Head Phillips Drive Screws (AV-832OHP-BK-4375), (2) W-EPDM-500180125 washers, and (2) Black Oxide Finishing Washers (AV-FW-08-BLK-1). This mounting hardware setup is perfect for most applications. Specifications OWB Loop – Universal P-Style Injection Molded Fits Belt Size: up to 1.50 inches and 1.75 inches Pre-Drilled: (2) 0.25 inch Hole Separation: 2 inches (on center) Color: Tactical Black Material: Proprietary Polymer Mounting Hardware Included: Yes Sold in Pairs = 2 QTY. For more holster making kits, holster making supplies, and sheath making supplies, see ( https://www.ebay.com/usr/ckkindustries)

Read More...

IWB Holster Belt Clip – TacWare/USA Made – 2 Hole – (w/Mounting Hardware)

10/08/2026

Holster IWB Belt Clip – TacWare/USA Made – 2 Hole – (w/Mounting Hardware) These are flexible polymer USA made TacWare brand belt clips. They are excellent for mounting sheath and holsters on belts and slings from 1.5″ to 1.75 inches. They feature (2) holes for multiple mounting attachment. Each one features an extended “finger grab” to ease installation and removal. Because of their material and design, they have a “spring effect” that helps insure their retention on the belt. Angled (2 Hole) Hardware: Each TacWare 2-Hole Angled Belt Clip comes with (2) AV-SP-250-BK slotted posts, (2) Oval Head Phillips Drive Screws (AV-832OHP-BK-4375), (2) W-EPDM-500180125 washers, and (2) #8 Black Oxide Finishing Washers (AV-FW-08-BLK-1). This mounting hardware setup is perfect for most applications. This IWB belt clip model is angled to help pull your firearm closer to your body, often used with IWB (inside-the-waistband) holster designs. Straight (2 Hole) Hardware: Each TacWare 2-Hole Straight Flange Belt Clip comes with (2) AV-SP-1875-BK slotted posts, (2) Truss Head Phillips Drive Screws (AV-832THP-BK-4375), and (2) W-EPDM-500180125 washers. This mounting hardware setup is perfect for most applications. Specifications Universal Sheath/Holster Belt Clip TacWare Brand Style: Angled and Straight Fits belt size up to 1.75 inches Color: Tactical Black Material: Proprietary Polymer (3-3/8″ x 3/4″ x .125″) Pre-Drilled: Yes (.1875″ diameter) Hole Spacing (.500″ on centers) Mounting Hardware Included: Yes Pack Size: 1 Pack or 2 Pack USA Made Sold Individually: 1-Pack = 1 QTY. 2-Pack = 2 QTY. For more holster making tools, eyelets, mounting parts, and kydex sheath making supplies, see ( https://www.ebay.com/usr/ckkindustries).

Read More...

Universal Holster Belt Loops – OWB TacWare Belt Loops (Fits up to 2.00in Belts)

10/08/2026

Universal Holster Belt Loops – OWB TacWare Belt Loops (Fits up to 2.00in Belts) OWB TacWare Belt Loops: These are flexible polymer USA made TacWare brand tapered belt loops. This model has a differential opening width to help pull your holster closer to your body. These are designed for OWB style holsters (outside-the-waistband). They are excellent for mounting sheath and holsters on belts and slings from 1.5″ to 2 inches. They feature (4) mounting holes for multiple attachment spacing options. They can be mounted with .50″ up to 1″ center spacing. Mounting Hardware Option: Each pair of TacWare OWB Loops comes with (4) AV-SP-250-BK slotted posts, (4) Oval Head Phillips Drive Screws (AV-832OHP-BK-4375), (4) W-EPDM-500180125 washers, and (4) Black Oxide Finishing Washers (AV-FW-08-BLK-1). This mounting hardware setup is perfect for most applications. Specifications: Universal Sheath/Holster Belt Loop TacWare Brand Style: OWB Fits belt size up to 2.0 inches Color: Tactical Black Material: Proprietary Polymer Pre-Drilled: Yes (.2187″ diameter) Hole Spacing (.50″ & 1.0″ on centers) Sold in Pairs: Yes Mounting Hardware Included: Yes if selected USA Made For more holster making kits, holster making supplies, and sheath making supplies, see ( https://www.ebay.com/usr/ckkindustries)

Read More...

Universal Holster Belt Loops – OWB Angled Belt Loops – (Fits 1.75-2.00in Belts)

10/08/2026

Universal Holster Belt Loops – OWB Angled Belt Loops – (Fits 1.75-2.00in Belts) OWB Angled Belt Loops: These are angled-design OWB (outside-the-waistband) belt loops from Talon Retention Systems. They are universal in design and will work on almost any rig. They feature (2) 1/4 inch mounting holes and can be affixed with either a post and screw assembly, or with #8 eyelets. They are semi-flexible and will adapt to almost any placement. Mounting Hardware Option: Each pair of OWB Angled Loops comes with (4) AV-SP-250-BK slotted posts, (4) Oval Head Phillips Drive Screws (AV-832OHP-BK-4375), (4) W-EPDM-500180125 washers, and (4) Black Oxide Finishing Washers (AV-FW-08-BLK-1). This mounting hardware setup is perfect for most applications. Specifications: OWB Loop – Universal Injection Molded Fits Belt Size: up to 2.00 inches Pre-Drilled: (2) Mounting Holes Color: Tactical Black Material: Proprietary Polymer Mounting Hardware Included: Yes if selected Note: These are sold in pairs. For more holster making kits, holster making supplies, and sheath making supplies, see ( https://www.ebay.com/usr/ckkindustries)

Read More...

Metal Belt Clips – Model 2 – Holster Belt Clips (w/SPTHA Mounting Hardware)

10/08/2026

Metal Belt Clips – Model 2 – Holster Belt Clips (w/SPTHA Mounting Hardware) Model 2 (Tactical and Police Finish): These are the Model 2 universal sheath/holster clips. They are excellent for mounting on KYDEX and leather carry systems and are very durable. These models are Black coated (Tactical style) or Nickel Plated (Police Finish) and is common on military sheaths/holsters. Each Model 2 holster belt clip comes with (2) AV-SP-125-BK slotted post, (2) Truss Head Phillips Drive Screw (AV-832THP-BK-250), and (2) W-EPDM-500180125 washer. This mounting hardware setup is perfect for most applications. Specifications: Universal Sheath/Holster Clip Black Coated or Nickel Plated Mounting Hardware Included: Yes Black: (2 x 1 x .025) inches Nickel Plated: (2.150 x 1 x 0.25) inches Sold Individually: 1-Pack = 1 QTY. 2-Pack = 2 QTY. 4-Pack = 4 QTY. For more holster making kits, holster making supplies, and sheath making supplies, see ( https://www.ebay.com/usr/ckkindustries)

Read More...

Monoblock Belt Clips – Inside-The-Waistband/IWB Holster Mounting Attachments

10/08/2026

Monoblock Belt Clips – Inside-The-Waistband/IWB Holster Mounting Attachments The Monoblock belt clip is designed to be mounted directly to a holster/sheath surface. This clip design allows for a very secure carry on belts, waistlines, or any attachment point where the spring steel clip tabs can be positioned securely. Each spring tab has an integrated security clutch to prevent it from easily becoming detached from the mounting point. The Monoblock clip comes in a standard DMG/Cu finish in dark matte grey and is non-reflective. It resists corrosion very well and can be buffed with most over-the-counter lubricants to remove surface blemishes and wear marks. This clip is a versatile and cost effective attachment solution that can be adapted to virtually any gun holster, knife sheath or carry item. Specifications Overall Length: 2.73 Inches Fits: Up to 1.5 Inch Belts Finish: Dark Grey (DMG/Cu) Engraving Included: (Select Above) Reflective: No Hole Pattern: (2)(Slotted) 0.220 height x 0.300 inch width Hole Spacing: (Adjustable) 0.860 – 1.15 inch on centers Hardware Included: (Select Above)Sold Individually: 1-Pack = 1 QTY. 2-Pack = 2 QTY. For more holster making kits, holster making supplies, and sheath making supplies, see ( https://www.ebay.com/usr/ckkindustries)

Read More...

RCS Belt Claw – Holster Claw – Left & Right – (w/Mounting Hardware)

10/08/2026

RCS Belt Claw – Holster Belt Claw – Left & Right – (w/Mounting Hardware) The RCS belt claw holster attachment is made to create leverage for the grip of a pistol and helps to keep it close to the body without disrupting the draw. The pre-drilled hole spacing is 1.5cm center-to-center. Raven Concealment designed their claw holster attachments to resist failure and mitigate stress fractures. This value-priced combo is the 1-pack with mounting hardware included. Each RCS Belt Claw (Right) comes with (2) AV-SP-125-BK slotted post, (2) Oval Head Phillips Drive Screw (AV-832OHP-BK-625), and (2) W-EPDM-500180125 washer. This mounting hardware setup is perfect for most applications. Specifications: Raven Concealment Color: Tactical Black Material: Proprietary Polymer Configuration: Right Mounting Hardware Included: Yes Sold Individually: 1-Pack = 1 QTY. 2-Pack = 2 QTY. For more holster making kits, holster making supplies, and sheath making supplies, see (https://www.ebay.com/usr/ckkindustries)

Read More...

Metal Belt Clips – Model 3 – Holster Belt Clips – Slip-Through Retainer Mount

10/08/2026

Metal Belt Clips – Model 3 – Holster Belt Clips – Slip-Through Retainer Mount Model 3 (Tactical Finish): This is the Model 3 design universal sheath/holster belt clip. It is excellent for mounting on KYDEX and leather with retainer carry systems and are very durable. This model is black (tactical style) and is common on military sheaths/holsters. This value-priced combo is the 1-pack, 2-pack, and 4-pack. This mounting setup is perfect for retainer mounting applications. Specifications: Universal Sheath/Holster Clip Black (Tactical) Finish Mounting Type: Slip-Through Retainer (2.10 x 1.25 x 0.25) inches Sold Individually: 1-Pack = 1 QTY. 2-Pack = 2 QTY. 4-Pack = 4 QTY. For more holster making kits, holster making supplies, and sheath making supplies, see ( https://www.ebay.com/usr/ckkindustries)

Read More...

Raven Concealment – Overhook Strut – (Fits Up to 1.75in Belts) – (w/Hardware)

10/08/2026

Raven Concealment – Overhook Strut – (Fits Up to 1.75in Belts) – (w/Mounting Hardware Options) Raven Concealment Overhook Struts offer a tough snap over to guarantee a snug fit with an easy release. There are ridges on the back of the strut that prevent mounting hardware from damaging sheaths and knives. Each of the pre-drilled holes are 15mm apart center-to-center. With the center hole being a slot, the strut can be rotated up to 10 degrees in either direction. Mounting Hardware Option: Each Raven Concealment Overhook Strut comes with (3) AV-SP-250-BK slotted post, (3) Truss Head Phillips Drive Screw (AV-832THP-BK-312), and (3) W-EPDM-500180125 washer. This mounting hardware setup is perfect for most applications. Specifications Raven Concealment Color: Tactical Black Material: Proprietary Polymer Pre-Drilled: Yes Mounting Hardware Included: Yes (If Selected) Belt size: Up to 1.75 inches Sold Individually: 1-Pack = 1 QTY. 2-Pack = 2 QTY. For more holster making kits, holster making supplies, and sheath making supplies, see ( https://www.ebay.com/usr/ckkindustries)

Read More...

Molle-Lok – Molle Mounting Attachment – (Fits 1.50-3.00in) – (Hardware Optional)

10/08/2026

Molle-Lok – Molle Mounting Attachment – (Fits 1.50-3.00in) – (Hardware Optional) The Molle-Lok is a spring loaded mounting attachment. With this design, there is no need for special tools to open the new locking mechanism. All you do is grasp outer heads and slide to manipulate and remove. This new locking system is reusable and failsafe, a requirement of US Military forces. The Molle-Lok is an innovative attachment system which is designed as an optional attaching device for the Military and Law enforcement. The Molle-Lok attaches accessories to the Pals/Molle body armor or load bearing equipment, vests, tactical bags, pouches etc. The adjustable design features mounting points from 1.50 to 2.20 inches in width. Hardware Option: Each Molle-Lok comes with (2) AV-SP-1875-BK slotted posts, (2) AV-832FHP-BK-375 Flat Head Phillips Drive Screws, and (2) W-EPDM-500180125 washers. This mounting hardware setup is perfect for most applications. Sold Individually: 1-Pack = 1 QTY. 2-Pack = 2 QTY. For more holster making kits, holster making supplies, and sheath making supplies, see ( https://www.ebay.com/usr/ckkindustries)

Read More...
Telhas Termoacústicas

TELHA SANDUÍCHE

Aluzinco / Galvalume

ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
              0,50mm (4,50 kg/m²)

LARGURA – 1.050 mm

TELHA + TELHA EPS 30mm + TELHA

Acesse nosso catálogo
Telhas Termoacústicas

TELHA FACE TELHA

Aluzinco / Galvalume

ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
              0,50mm (4,50 kg/m²)

LARGURA – 1.050 mm

TELHA + TELHA EPS 30mm

Acesse nosso catálogo
Telhas Termoacústicas

TELHA FACE LISA

Aluzinco / Galvalume

ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
              0,50mm (4,50 kg/m²)

LARGURA – 1.050 mm

TELHA + TELHA EPS 30mm

Acesse nosso catálogo
Telhas Termoacústicas

TELHA FACE LISA com filme

Aluzinco / Galvalume

ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
              0,50mm (4,50 kg/m²)

LARGURA – 1.050 mm

TELHA + TELHA EPS 30mm + FILME ACARTONADO

Acesse nosso catálogo
Telhas TP40 de Qualidade

TELHA TRAPEZOIDAL TP40

Aluzinco / Galvalume

ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
              0,50mm (4,50 kg/m²)

LARGURA – 1.050 mm

Acesse nosso catálogo
Telhas TP40 de Qualidade

TELHA ONDULADA

Aluzinco / Galvalume

ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
              0,50mm (4,50 kg/m²)

LARGURA – 1.050 mm

Acesse nosso catálogo
Chapas de Qualidade

CHAPA ZINCADA

Zincada

ESPESSURAS – 0,43mm e 0,50mm
DIMENSÕES – 1.250 mm X 2.000 mm
                         1.250 mm X 3.000 mm

Acesse nosso catálogo
Para outras dimensões - Consulte-nos!
Chapas de Qualidade

CHAPA ALUZINC / GALVALUME

Aluzinco / Galvalume

ESPESSURAS – 0,43mm e 0,50mm
DIMENSÕES – 1.250 mm X 2.000 mm
                         1.250 mm X 3.000 mm

Acesse nosso catálogo
Para outras dimensões - Consulte-nos!
Chapas de Qualidade

BOBININHAS E SLITTERS

Aluzinco / Galvalume e Zincadas

ESPESSURAS – 0,43mm e 0,50mm
DIMENSÕES – 200 / 300 / 350 / 400 / 500 / 600 / 800 / 900 / 1.200
COMPRIMENTOS – 42m / 84m

Acesse nosso Catálogo
Para outras dimensões - Consulte-nos!