PGN Bearings

(2 x 10-Lb Spools) ER70S-6 .035″ (0.9 mm) Mild Steel MIG Welding Wire

11/08/2026

ER70S-6 Mild Steel MIG Welding Wire Wire Diameter: .035″ inches (0.9mm) Weight: 20-lbs (2 Rolls – 10-lbs each) Measurements: 8″ inch – Spool Diameter 2″ inch – Center Hole (Hub) Diameter 2″ inch – Wide Spool It can be used in tee welding of carbon steel and low alloy steel in the corresponding strenght grade. The Roll comes packed in moisture-resistant plastic film. Deposited chemical composition: (wt%) C: 0.08 / Mn: 1.50 / Si: 0.89 / Cr: 0.02 / Ni: 0.03 Mo: 0.002 / P: 0.013 / S: 0.012 / V: 0.003 / Cu: 0.11

(2 x 10-Lb Spools) PGN ER308L .035″ MIG Stainless Steel Welding Wire

11/08/2026

PGN Stainless Steel MIG Welding Wire – ER308L – 0.035 Inch, 2 x 10 Pound Spool – Low-Carbon Mild Steel MIG Wire for Reduced Splatter and Better Corrosion Resistance – For All Position Gas Welding We set out to create a solid MIG wire that worked beautifully with stainless steel. MIG welding wire with an arc you could control, penetration that inspired confidence, and low splatter that kept cleaning to a minimum and aesthetics to the max.And we did just that. Meet the PGN ER308L welding wire. It creates smooth welds on 304, 304L, 308, 308L, 321, and 347 stainless steels. Thanks to the low carbon content (0.03% maximum), corrosion and intergranular carbide precipitation is greatly decreased.We go the extra mile by diligently packing our MIG welder wire in moisture-resistant film – something others don’t. This means wire that’s rust-free, has no tangles, and gives you no issues when feeding it into your welder.Whether you’re tackling a client’s project, performing repairs in the garage, or bringing striking metal art to life, the ER308L welding wire .035 allows you to create a variety of welds when working in all manner of positions.It’s ideal for both single & multi-pass welding and leads to aesthetic T-joints, butt welds, and lap welds. And with a wire thickness of 0.035″ (0.9mm), you’ll achieve great penetration without the high risk of burning through the base metal.With PGN, you also don’t just get 0.035 welding wire that will take your work to the next level; you get the support of an experienced team based right in South Florida. Go ahead, get MIG welding accessories you can count on. ModelER308LWire Diameter0.035″ inch (0.9mm)Weight20-lbsSpool Diameter8″ inchesCenter Hole (Hub) Diameter2″ inchWide (Spool)2″ inchesTensile Strenght: (RM MPa)510Deposited chemical composition(wt%) : C 0.53 / Si 0.53 / Mn 2.1 / S 0.01 / P 0.015 / Ni 9.95 / Cr 19.73 / Mo 0.02 / Cu 0.01MaterialStainless SteelPackage Inclusions2 x 10lb Stainless Steel MIG Wire Spool

(12 x 10-Lb Spools) ER70S-6 .035″ (0.9 mm) Mild Steel MIG Welding Wire

11/08/2026

Weld Your Way to Impressive Results Your choice of MIG wire can make all the difference. It can mean the difference between unsightly splatter and a smooth weld. The difference between exceptional precision and an uncontrollable arc that ruins all your hard work. Choose professional-looking results with PGN. Our ER70S-6 solid MIG wire stands out with impressive arc control and low splatter when working on mild steel. So, you end up with a beautiful weld you’ll be proud to show off. And we go the extra mile by diligently packing our MIG welding wire in moisture-resistant film – something others don’t. This means wire that’s corrosion-free, has no tangles, and gives you no issues when feeding it into your welder. Product Specifications:Weight: 120 PoundsPackage Inclusions: 12 x 10lb MIG Wire SpoolWire Diameter: .035″ InchesSpool Diameter: 8″ InchesSpool Center Hole Diameter: 2″ InchesSpool Thickness: 2″ InchesDeposited chemical composition: (wt%) C: 0.08 / Mn: 1.50 / Si: 0.89 / Cr: 0.02 / Ni: 0.03 / Mo: 0.002 / P: 0.013 / S: 0.012 / V: 0.003 / Cu: 0.11Experience the Versatility Whether you’re tackling a client’s project, performing repairs in the garage, or bringing striking metal art to life, the ER70S-6 welding wire .035 allows you to create a variety of welds when working in all manner of positions. It’s ideal for both single & multi-pass welding and leads to aesthetic T-joints, butt welds, and lap welds. And with a wire thickness of 0.035″, you’ll achieve great penetration without the high risk of burning through the base metal. With PGN, you also don’t just get a MIG welder wire that will take your work to the next level; you get the support of an experienced team based right in South Florida. Go ahead, get MIG welding accessories you can count on.

ER70S-6 1LB 1/16″ x 16″ Mild Steel TIG Welding Rod – PGN

10/08/2026

PGN International presents high-quality, reliable ER70S-6 welding rods perfect for mild steel and low alloy welding. Our welding rod is designed to deliver the best welding performance with its 5% silicon composition. These rods can be used for many applications – from automotive repairs to construction projects. Each wire mild steel rod melts at a temperature of 700-750º Fahrenheit. They are easy to use and require no extensive setup. Whether a skilled tradesperson or just starting, you will feel confident knowing our welding rod is your best bet for success. These welding rods require a shielding gas of 100% argon/CO2, making them perfect for anyone needing reliable welding. Our welding supplies and accessories will help you create defect-free weld deposits. Welders and construction workers can trust the consistency and quality of these ER70S6 rods. The 1 lb pack provides enough welding material for forming several sturdy welds. These top-quality welding rods feature excellent arc stability, smooth weld transfer, low spatter deposits, and minimal smoke production. Our tig welding equipment is perfect for welding mild and low alloy steel. It is also suitable for construction work, farm implements fabrication, shaft buildup, tanks, truck bodies, and general shop applications. The welding rod is appropriate for most metals needing thermal treatment. This engineering rod can be used for many projects, making them the one-stop solution for welders. No matter what kind of project you are working on, you can trust our 1lb ER70S6 to help make it happen.

(2 x 1-Lb Spools) PGN ER4043 .035″ MIG Aluminum Welding Wire

10/08/2026

PGN Aluminum MIG Welding Wire – ER4043-0.035 Inch, 2 x 1 Pound Spool – Aluminum MIG Wire with Silicon for Puddle Fluidity and Enhanced Weld Durability – For All Position Gas Welding We set out to create a solid MIG wire that worked beautifully with aluminum alloys. MIG welding wire with an arc you could control, penetration that inspired confidence, and low splatter that kept cleaning to a minimum and aesthetics to the max.And we did just that. Meet the PGN ER4043 welding wire. It creates smooth welds on 6061, 6063, 5052, 3004, 3003 and cast alloys 356.0, 357.0, 413.0, and 443.0. A 5% silicon content increases puddle fluidity for easier welding and crack-resistance for better durability.We go the extra mile by diligently packing our MIG welder wire in moisture-resistant film – something others don’t. This means wire that’s rust-free, has no tangles, and gives you no issues when feeding it into your welder.Whether you’re tackling a client’s project, performing repairs in the garage, or bringing striking metal art to life, the ER4043 welding wire .035 allows you to create a variety of welds when working in all manner of positions.It’s ideal for both single & multi-pass welding and leads to aesthetic T-joints, butt welds, and lap welds. And with a wire thickness of 0.035″ (0.9mm), you’ll achieve great penetration without the high risk of burning through the base metal.With PGN, you also don’t just get 0.035 welding wire that will take your work to the next level; you get the support of an experienced team based right in South Florida. Go ahead, get MIG welding accessories you can count on. ModelER4043Wire Diameter0.035″ inch (0.9mm)Weight2 PoundsPost Anodizing ColorGrayDensity0.097 Lbs/in3Melting Range1065 ºFâ€“ 1170 ºFDeposited chemical composition(wt%) : Si 5.2 / Fe 0.15 / Cu 0.009 / Mn 0.008 / Mg 0.006 / Zn 0.004 / Ti 0.07 / Al Rem / Be 0.0001MaterialAluminumPackage Inclusions2 x 1lb Aluminum MIG Wire Spool

(5 Pack) PGN #40 Roller Chain Offset Links – 1/2″ Pitch – Half Link

10/08/2026

Units per package: 5 Below are the specifications for the chain that uses this half link: ANSI Chain No.: #40 Pitch (P): 0.5 inch (12.7 mm) Roller Diameter (d1 max): 0.313 inch (7.95 mm) Width Between Inner Plates (b1 min): 0.310 inch (7.85 mm) Pin Diameter (d2 max): 0.156 inch (3.96 mm) Pin Lenght (L max): 0.654 inch (16.60 mm) Pin Lenght (Lc max): 0.701 inch (17.80 mm) Inner Plate Depth (h2 max): 0.472 inch (12.0 mm) Plate Thickness (T max): 0.059 inch (1.50 mm) Breaking Load: 9.6 kN (2182 lbs) Weight: 0.417 lb/ft (0.62 kg/m)

(5 Pack) PGN #420 Roller Chain Offset Links – 1/2″ Pitch – Half Link

10/08/2026

Units per package: 5 Below are the specifications for the chain that uses this half link: ANSI Chain No.: #420 Pitch (P): 0.5 inch (12.7 mm) Roller Diameter (d1 max): 0.30 inch (7.77 mm) Width Between Inner Plates (b1 min): 0.24 inch (6.25 mm) Pin Diameter (d2 max): 0.15 inch (3.96 mm) Pin Lenght (L max): 0.66 inch (17 mm) Pin Lenght (Lc max): 0.72 inch (18.4 mm) Inner Plate Depth (h2 max): 0.47 inch (12 mm) Plate Thickness (T max): 0.07 inch (2.03 mm) Ultimate Tensile Strenght (Q min): 16.00/3636 kN/LB Average Tensile Strenght (Qo): 16.1 kN Weight (q): 0.76 lb/ft (0.34 kg/m)