Captain O-Ring

Captain O-Ring ORS/ORFS Flat Face Hydraulic Oring Seal Kit (180pc, Buna 90)

Captain O-Ring ORS/ORFS (for Flat Face Fittings) Hydraulic O-Ring Seal Kit (Buna 90 / BN90 – 180 Piece Kit) Product Features: Includes high quality Buna Nitrile (90 durometer) o-rings Includes #4 (1/4″ Flat Face), #6 (3/8″ Flat Face), #8 (1/2″ Flat Face), #10 (5/8″ Flat Face), #12 (3/4″ Flat Face), #16 (1″ Flat Face), #20 (1-1/4″ Flat Face), and #24 (1-1/2″ Flat Face) o-rings Used in sealing ORS / ORFS Flat Face Hydraulic Fittings in hydraulic equipment. Also called O-Ring Face Seal Fittings, and SAE J1453 Fittings. Manufactured and Warrantied by Captain O-Ring LLC, with decades in a sealing and chemical industry Assembled in the USA! Captain O-Ring’s 180 Piece ORS Hydraulic Buna90 (BN90) O-Ring Kit includes 8 sizes and 180 total o-rings. The kit includes #4 (1/4″ Flat Face), #6 (3/8″ Flat Face), #8 (1/2″ Flat Face), #10 (5/8″ Flat Face), #12 (3/4″ Flat Face), #16 (1″ Flat Face), #20 (1-1/4″ Flat Face), and #24 (1-1/2″ Flat Face) o-rings. This kit contains o-rings made of Buna Nitrile (90 durometer) material, also known as BN90 or NBR90. Buna 90 is a common material used in ORS Flat Face seal applications due to its resistance to many hydraulic fluids and its flexability/sealability in low temperatures. The included size chart on the front of the kit makes sizing up o-rings quick and effortless. O-Rings are conveniently sorted by size in a shatterproof Flambeau divider box. What to expect: This item includes 180 O-Rings in a Flambeau plastic divider case with “Captain O-Ring” branded packaging. Manufactured and warrantied against defect for one year by Captain O-Ring LLC. “Captain O-Ring” is a registered trademark of Captain O-Ring LLC. Note: These are round o-rings used in ORS Flat Face Fittings. The o-rings themselves are round and not flat. Alternate Part Numbers: #4 Tube Fitting: Caterpillar 4J5477; Komatsu 02896-11008, WA0011, 855051011; John Deere T77814 #6 Tube Fitting: Caterpillar 6V8397; Komatsu 02896-11009, WA0012, 855051012; John Deere T77613 #8 Tube Fitting: Caterpillar 6V8398; Komatsu 02896-11012, 382997R1, 855051014; John Deere T77857 #10 Tube Fitting: Caterpillar 7J9108; Komatsu 02896-11015, 392382R1, 855051016; John Deere T77932 #12 Tube Fitting: Caterpillar 6V9746; Komatsu 02896-11018, 384943R1, 855051018; John Deere T77858 #16 Tube Fitting: Caterpillar 5K9090; Komatsu 384376R1, 855051021; John Deere T76938 #20 Tube Fitting: Caterpillar 6V8400; Komatsu WA0025, 855051025; John Deere T78612 #24 Tube Fitting: Caterpillar 8T0315; Komatsu 927379C1, 855051029; John Deere T78784

Read More...

(6 Pack) Gas Can Spout Gasket Seals – Universal Rubber Replacements

(6 Pack) Gas Can Spout Gasket Seals – Universal Rubber Replacement Gasoline/Fuel Jug Washer Seals (Upgraded Version, Compatible with Ethanol, Stabilizer, etc) Product Features: Includes 6 Captain O-Ring Gas Can Spout Seals. Fits most standard plastic jerry can spouts, including 1, 2, 2.5, 5, 10, 20 gallon cans and 5 and 10 liter jugs/tanks. Upgraded synthetic rubber lasts longer than the seal that came with your gas can. Compatible with Gasoline, Gasoline w/ Ethanol, 2-Stroke Oils, Diesel, Diesel Fuel Additive, Fuel Stabilizers, Kerosene, etc, for the longest lasting gas can seal available. Refit your leaking gas container with a new spout seal rather than purchasing a whole new gas can. Easily slips/stretches onto many common gas can spouts. Compatible with Scepter Easy-Flo spouts, Rotopax RX-R3G, and many other common spouts. Check out the product photos for dimensions to check if it matches the gasket on your gas can. High quality compression molding for a smooth finish unlike the jagged edges found on knock-off imported versions of this product that allow leaking of liquid and vapors/fumes. Replace your old, worn, cracked gas can seals to quickly bring your gas can back to its new condition. No more leaking or dripping from the connection between your fuel can and spout. Captain O-Ring’s replacement gas can spout seals fit most common gas can spouts (see photos for details) and restore the safety and functionality of your gas can. New gas can seals eliminate dripping flammable fuels while pouring and leaking hazardous vapors during storage. Unlike others, these seals are constructed of an upgraded synthetic rubber and are compatible with all common fuels; as well as ethanol, fuel stabilizers, fuel/diesel additives, 2-stroke oils, and more. If the seals that came with your gas can were destroyed by the now common 10-15% ethanol gasoline or by gas/diesel with fuel stabilizer/additive, then these are the seals to use as replacement. What To Expect: Six (6) Gas Can Seals in Captain O-Ring branded packaging. Manufactured and warrantied for one year against manufacturer defect by Captain O-Ring LLC.

Read More...
Telhas Termoacústicas

TELHA SANDUÍCHE

Aluzinco / Galvalume

ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
              0,50mm (4,50 kg/m²)

LARGURA – 1.050 mm

TELHA + TELHA EPS 30mm + TELHA

Telhas Termoacústicas

TELHA FACE TELHA

Aluzinco / Galvalume

ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
              0,50mm (4,50 kg/m²)

LARGURA – 1.050 mm

TELHA + TELHA EPS 30mm

Telhas Termoacústicas

TELHA FACE LISA

Aluzinco / Galvalume

ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
              0,50mm (4,50 kg/m²)

LARGURA – 1.050 mm

TELHA + TELHA EPS 30mm

Telhas Termoacústicas

TELHA FACE LISA com filme

Aluzinco / Galvalume

ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
              0,50mm (4,50 kg/m²)

LARGURA – 1.050 mm

TELHA + TELHA EPS 30mm + FILME ACARTONADO

Telhas TP40 de Qualidade

TELHA TRAPEZOIDAL TP40

Aluzinco / Galvalume

ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
              0,50mm (4,50 kg/m²)

LARGURA – 1.050 mm

Telhas TP40 de Qualidade

TELHA ONDULADA

Aluzinco / Galvalume

ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
              0,50mm (4,50 kg/m²)

LARGURA – 1.050 mm

Chapas de Qualidade

CHAPA ZINCADA

Zincada

ESPESSURAS – 0,43mm e 0,50mm
DIMENSÕES – 1.250 mm X 2.000 mm
                         1.250 mm X 3.000 mm

Chapas de Qualidade

CHAPA ALUZINC / GALVALUME

Aluzinco / Galvalume

ESPESSURAS – 0,43mm e 0,50mm
DIMENSÕES – 1.250 mm X 2.000 mm
                         1.250 mm X 3.000 mm

Chapas de Qualidade

BOBININHAS E SLITTERS

Aluzinco / Galvalume e Zincadas

ESPESSURAS – 0,43mm e 0,50mm
DIMENSÕES – 200 / 300 / 350 / 400 / 500 / 600 / 800 / 900 / 1.200
COMPRIMENTOS – 42m / 84m