Can

10 PCS Fuel Gas Can Jug Vent Caps For Gas Fuel Water Can to Allow Faster Flowing

remium Material: Universal gas can vent cap is made of premium stainless steel and premium rubber, rustproof and durable.Leak Proof Design: Gas can replacement vent cap is designed with screw caps and double rubber sealing rings that can ensure leak proof.Vent Cap: Fuel can air vent caps can be used for all kinds of 3 or 5 gallon gas can or other plastic gas or water can, provide a vent and make the fuel or water pour out quickly and smoothly.Easy Operation: Simple to install the valve stem and rubber sealing ring onto the can via a wire after drilling a hole through the can, then screw on the dust cap finished.(It’s better to drill a hole on high and back of the can, avoiding the handle because it’s thicker.)the diameter of the exhaust port is 1/3 inch, please check the size

Read More...

EAGLE Gas Can CORK GASKET SET “Old School” 1″ + 1-1/2″ + 2-1/2″ Outer Dimensions

DESCRIPTION:Aftermarket, Brand New, Never Used, Not in Retail Package.**Gas Cans, Gas Caps & Ruler Not Included** 1 inch, 1-1/2 inch and 2 inch CORK GASKET REPLACEMENTS. PLEASE READ: SET OF 3 CORK GASKET REPLACEMENT LINERS (We also have VITON RUBBER Gaskets in this set as well, please ask us,we’re always happy to help). Replace your old and worn out Gaskets for your Vintage Metal Caps (Metal Caps not included but Please see our other listings as WE DO HAVE SOME FOR SALE). Cork has been used for years in Fuel, Gas and Oil cans for it’s resistant properties. Fits hundreds of different vintage 2-1/2 and 5 gallon gas, fuel, diesel, kerosene and railroad oil cans with these 3 sizes. Might fit on some gas, fuel, diesel, kerosene and oil cans like Eagle, Brookins, Gasser, Delphos, Napa, Balkamp, Ironsides, Justrite, Reeves, Duo-Therm (Duo-Trim), Sinclair, Conoco, Porta, Coleman, McCulloch, Standard, Lawn-Boy, Railroad Oil Cans and Tru-Test to mention a few. ★ IMPORTANT: PLEASE DOUBLE CHECK MEASUREMENTS AND COMPARE TO YOUR EXISTING PARTS. Not all Gas Can Parts are Interchangeable between Brands. It is the responsibility of the buyer to measure their required needs prior to puchase. These Replacement Parts are hard to find and considered obsolete due to New Government Regulations. Buy a few to keep on hand to Save your old gas can from the landfill ★**Gas Cans, Gas Caps & Ruler Not Included** By making this purchase you are agreeing to the terms and conditions of our disclaimers. Waiver, Disclaimers and Indemnity: By purchasing this or any other product from Gas Spouts Plus LLC or their affiliates (collectively known as “Seller”), no matter which venue or location the sale is consummated, you (“Purchaser”) represent that you are of legal age (18 years or older), to use this item, enter into this agreement, and become bound by it’s terms. There are inherent risks involved in using any product, even while using protective equipment (which Purchaser is responsible to investigate and obtain), including but not limited to: serious physical injury, and possibly death. Purchaser waives all liability of Seller and claims against Seller for damages, losses, costs, injuries, penalties, expenses, attorney’s fees and liabilities of whatever nature whether in tort, contract, warranty or strict liability, including without limitation those resulting from injuries or deaths of persons and damages to property resulting from, or arising out of or in connection with the use of this item, loss or liability resulting from negligence, operational deficiencies or failures, acts of God, or other causes (whether such causes are avoidable or not) caused in whole or in part, directly or indirectly by Purchaser, Seller’s employees, representatives, agents or third parties (collectively, “specified claims”). Under no circumstances is Seller responsible for special, indirect, incidental or consequential damages, even if Purchaser has been advised of their possible existence. Purchaser agrees to indemnify, defend and hold Seller harmless from and against any and all specified claims.Seller hereby disclaims all claims, expressed and implied, with respect to this item, including without limitation, any implied warranties of merchantability, fitness for a particular purpose, or that the item is free from latent defects. Purchaser has had the opportunity to contact Seller to ask any questions regarding this item prior to purchase. Item is sold in its current (new) and “as is” condition as described under the description of this sale. Purchaser knowingly and freely assumes all risks of ownership and use, known and unknown. If Purchaser loans, re-sells, gifts, or transfers the item, Purchaser will obtain transferees agreement of all the terms contained herein. Should any legal cause of action arise, the Buyer agrees to defend Seller, and hold harmless and forever release the Seller, from any and all legal liability. Buyer also agrees to hold Seller harmless from any violations of any Federal, State and local regulations by purchase and or use of any of these products. Due to possible variations in gas cans (variety of reasons), Gas Spouts Plus LLC cannot insure a spill-proof fit. PURCHASER WARRANTS THAT THEY HAVE READ, UNDERSTOOD, AND ACKNOWLEDGE THAT THEY HAVE GIVEN UP SUBSTANTIAL RIGHTS BY THIS AGREEMENT, AND AGREE TO THESE TERMS FREELY AND VOLUNTARILY WITHOUT ANY INDUCEMENT.

Read More...

Enviro-Safe Refrigerants, R-290, (1) One 8 oz. Can

⚠️Use Caution: Only use in systemsdesigned and rated for flammable refrigerants. ⚠️Do Not Use in systems intended for non-flammable refrigerants. TheEnviro-Safe® R290 Refrigerant is anEPA-approved propane-based hydrocarbon refrigerant designed for use in systems calling for R290.

Read More...

Dixie Narco 276E, 501E, 600E Single Column 12oz Celsius, Red Bull Slim Can Kit

Dixie Narco 276E, 501E, 600E Single Column 12oz Slim Can Celsius, Red Bull Kit. The slim can kit is used to prevent two slim cans from falling at the same time. This kit works with 12oz metal can shim with 1/2″ lip (Not included – in another listing if needed). Included in kit is (2) 19.5″ spring loaded rotor rods and (2) white sleeves. The rods slip in white sleeves and then both install in rotor A & C holes leave the middle hole open (install rod spring to the rear). Set brown vend motor disc for 2 deep slim can #5. If both cans drop – try #2 or 3 setting. Load slim cans 2 deep NOT 3 deep! This kit is brand new.

Read More...

KP KOOL PRODUCT Gas Can Spout for Old Style fits Blitz, Midwest, Scepter & More

UPC: 860000137751Update your old Cans. This spout is guaranteed to work for life and made with prime quality material.3 Gas Spout including Rubber Gasket. Spout Length: Approx. 8.25”. Spout Fits on almost all the cans out there.3 Screw Cap Collar (3 Yellow and 3 Black). The outer diameter including side ribs: 2.75″ and Fits on almost all the cans.Vent plugs are included!3 Multifunctional stopper caps: stopper cap is used as a cap for the spout and also works as a stopper which fits perfectly inside of the screw collar cap when hiding the spout inside of the gas can. 3 Caps with Stripe as shown in the picture. Fits most of the cans.For Vent Plug, Please Drill a 1/2″ Hole Into the Can & Then Push The Vent Into The Hole. This Is The Best Gas Can/Water Jug Spout Kit available in North America.Brand New, Never Used and includes the following. 3 Universal Gas Spout including 3 Rubber Gasket. These are very high quality fuel / Gas / Diesel / Kerosene / Water “SPOUTS “. 3 Screw Collar Caps in yellow and Black. These screw cap retaining rings holds the spout to the can. 3 Rear Vent Cap as shown the picture. Excellent Product. Buy with Confidence. Fits on Most of the Cans out there with Fine or Coarse Thread. Part NumberKP14Number of Items1Brand NameKool ProductsColorYellowEAN0860000137751Item Weight4.9 ouncesMaterialPlasticSize3 PACKUNSPSC Code41000000UPC860000137751

Read More...

DAP® Weldwood® Contact Landau Top & Trim HHR Spray Adhesive 14oz Can

Weldwood Landau Top & Trim Spray Adhesive is a web formula that provides a long-lasting permanent bond on contact. When cured Landau Top & Trim is high heat resistant, water resistant, and creates a flexible bond. It is ideal for use with automotive interiors, laminate work, and many other demanding jobs. Features & Benefits:Permanent bondHigh heat resistantWater resistantInterior & exterior useCreates a strong durable bond

Read More...

Supercool Ffq Air Conditioning Fast Flush, Can, 32Oz.

A/C Flush, Base Type Solvent, Container Type Can, Container Size 1 qt, Net Weight 32 oz, Product Form Liquid, Boiling Point 250 Degrees F, Butyl-Free Butyl-Free, Chlorinated/Non Chlorinated Non-Chlorinated, Flammability Nonflammable, Biodegradable Biodegradable, Cleaner Application Automotive Vehicles, Electric/Hybrid Vehicles, R-12 Systems, R-1234yf Systems, R-134a Systems, Cleaner Type A/C Flush, Color Yellow.

Read More...
Telhas Termoacústicas

TELHA SANDUÍCHE

Aluzinco / Galvalume

ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
              0,50mm (4,50 kg/m²)

LARGURA – 1.050 mm

TELHA + TELHA EPS 30mm + TELHA

Telhas Termoacústicas

TELHA FACE TELHA

Aluzinco / Galvalume

ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
              0,50mm (4,50 kg/m²)

LARGURA – 1.050 mm

TELHA + TELHA EPS 30mm

Telhas Termoacústicas

TELHA FACE LISA

Aluzinco / Galvalume

ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
              0,50mm (4,50 kg/m²)

LARGURA – 1.050 mm

TELHA + TELHA EPS 30mm

Telhas Termoacústicas

TELHA FACE LISA com filme

Aluzinco / Galvalume

ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
              0,50mm (4,50 kg/m²)

LARGURA – 1.050 mm

TELHA + TELHA EPS 30mm + FILME ACARTONADO

Telhas TP40 de Qualidade

TELHA TRAPEZOIDAL TP40

Aluzinco / Galvalume

ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
              0,50mm (4,50 kg/m²)

LARGURA – 1.050 mm

Telhas TP40 de Qualidade

TELHA ONDULADA

Aluzinco / Galvalume

ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
              0,50mm (4,50 kg/m²)

LARGURA – 1.050 mm

Chapas de Qualidade

CHAPA ZINCADA

Zincada

ESPESSURAS – 0,43mm e 0,50mm
DIMENSÕES – 1.250 mm X 2.000 mm
                         1.250 mm X 3.000 mm

Chapas de Qualidade

CHAPA ALUZINC / GALVALUME

Aluzinco / Galvalume

ESPESSURAS – 0,43mm e 0,50mm
DIMENSÕES – 1.250 mm X 2.000 mm
                         1.250 mm X 3.000 mm

Chapas de Qualidade

BOBININHAS E SLITTERS

Aluzinco / Galvalume e Zincadas

ESPESSURAS – 0,43mm e 0,50mm
DIMENSÕES – 200 / 300 / 350 / 400 / 500 / 600 / 800 / 900 / 1.200
COMPRIMENTOS – 42m / 84m