Agilent/HP

HP / Agilent 34401-88304 Rear Panel / Bezel fits 34401A, 33120A, 53131A, 53132A

HP / Agilent 34401-88304 Plastic Rear Panel / Bezel Replacement. High Quality 3D Print with two screws. This is not original part, it is high quality 3D printed replacement item. Fits the following HP / Agilent / Keysight units: 34401A, 33120A, 53131A, 53132A, 53181A, 34420A, 33250A, 66111A, 66319D, 6611C, 6612B, 6612C, 6613C, 6614C, 66311A, 66312A, 8153A, 8156A, 3478A, 5316B, E3640A, E3641A, E3642A, E3643A, E3644A, E3645A, certain 8112A, certain 8116A HP / Agilent part numbers: 34401-88304, 03478-88304, 03478-88302, E3640-40015 Includes:Plastic Rear Panel Two Captive Screws This item does not include four brass inserts for rackmount installation. This auction ONLY includes the item described in the title. This item will be well packaged. Same day shipping if ordered by 1:00 PM EST (except holidays and weekends).See my listings for other HP / Agilent rear panels here.If you would like any other custom 3D printed replacement part, please don’t hesitate to reach out to me.

Read More...

Agilent HP Philips Infiniium Oscilloscope 54831M 600 MHz 4 GSa/s

Agilent Philips Infiniium Oscilloscope 54831M 600 MHz 4 GSa/s Offered is this hospital used Agilent Philips Infiniium Oscilloscope 54831M 600 MHz 4 GSa/s. Please take a look at the 7 pictures shown below for condition and content. This unit is clean and ready for use, though it is the responsibility of buyer to have it checked out before use. 30 Day parts warranty included. Click here to take a look at our other Medical listings. This unit was removed from service from a hospital. It is the buyers responsibility to have it tested before use. Seller: Trevor Lawson Business: gba Medical International Address: PO Box 33 Powell Butte, OR 97753 Payment Options: Paypal / If you are having trouble with PayPal or do not have an account please feel free to contact us. Shipping Options: Flat rate of $65.00 UPS Ground (continental USA). Alaska, Hawaii please inquire. Worldwide, please use the shipping calculator found at the top of this page. An international handling fee of $5.00 is reflected in the calculated cost. We ship to: USA, Worldwide (International Buyers will be responsible for all Duties and Taxes assessed.) eBay requires the disclaimer below for all items listed in this category. It may not actually apply to this item. If you have questions please don’t hesitate to contact us. ” The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.” GOODS-BYE AUCTION, LLC DBA: GBA MEDICAL INTERNATIONAL WARRANTEES AND REPRESENTS THAT THE GOODS ARE AS THEY ARE DESCRIBED IN THE ABOVE LISTING. WE WILL ACCEPT RETURNS OF THE GOODS ONLY IF THEY FAIL TO MEET THE DESCRIPTIONS ABOVE. GOODS-BYE AUCTION, LLC DBA: GBA MEDICAL INTERNATIONAL SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. Some states do not allow the disclaimer of implied warranties, so the foregoing disclaimer may not apply to you. This warranty gives you specific legal rights and you may also have other legal rights that vary from state to state. GOODS-BYE AUCTION, LLCs DBA: GBA MEDICAL INTERNATIONAL ENTIRE LIABILITY TO YOU OR ANY THIRD PARTIES UNDER ANY CIRCUMSTANCE IS LIMITED TO THE SALES PRICE OF THE RELEVANT GOODS AND $100. Some States do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. All information on this page is Copyright (c) 2005 goods-bye auction, LLC DBA: GBA MEDICAL INTERNATIONAL, All Rights Reserved. _gsrx_vers_841 (GS 7.0.16 (841))

Read More...

HP Agilent 85130F Adapter Kit 2.4mm-3.5mm (m&f)

Model No. 85130F. At Silicon Salvage, we turn the complex challenge of e-waste into a clear, secure, and sustainable process. — the answer is Silicon Salvage. Silicon Salvage is not an affiliate, representative, or authorized distributor for any manufacturer listed unless explicitly stated.

Read More...
Telhas Termoacústicas

TELHA SANDUÍCHE

Aluzinco / Galvalume

ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
              0,50mm (4,50 kg/m²)

LARGURA – 1.050 mm

TELHA + TELHA EPS 30mm + TELHA

Telhas Termoacústicas

TELHA FACE TELHA

Aluzinco / Galvalume

ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
              0,50mm (4,50 kg/m²)

LARGURA – 1.050 mm

TELHA + TELHA EPS 30mm

Telhas Termoacústicas

TELHA FACE LISA

Aluzinco / Galvalume

ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
              0,50mm (4,50 kg/m²)

LARGURA – 1.050 mm

TELHA + TELHA EPS 30mm

Telhas Termoacústicas

TELHA FACE LISA com filme

Aluzinco / Galvalume

ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
              0,50mm (4,50 kg/m²)

LARGURA – 1.050 mm

TELHA + TELHA EPS 30mm + FILME ACARTONADO

Telhas TP40 de Qualidade

TELHA TRAPEZOIDAL TP40

Aluzinco / Galvalume

ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
              0,50mm (4,50 kg/m²)

LARGURA – 1.050 mm

Telhas TP40 de Qualidade

TELHA ONDULADA

Aluzinco / Galvalume

ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
              0,50mm (4,50 kg/m²)

LARGURA – 1.050 mm

Chapas de Qualidade

CHAPA ZINCADA

Zincada

ESPESSURAS – 0,43mm e 0,50mm
DIMENSÕES – 1.250 mm X 2.000 mm
                         1.250 mm X 3.000 mm

Chapas de Qualidade

CHAPA ALUZINC / GALVALUME

Aluzinco / Galvalume

ESPESSURAS – 0,43mm e 0,50mm
DIMENSÕES – 1.250 mm X 2.000 mm
                         1.250 mm X 3.000 mm

Chapas de Qualidade

BOBININHAS E SLITTERS

Aluzinco / Galvalume e Zincadas

ESPESSURAS – 0,43mm e 0,50mm
DIMENSÕES – 200 / 300 / 350 / 400 / 500 / 600 / 800 / 900 / 1.200
COMPRIMENTOS – 42m / 84m