Latex Free Contra Angles 105° 90°. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
Type:Heat Shrink Tubing. Shrink Temperature. Our heat shrink tubing it very soft and elastic can effectively retardant, excellent Insulation performance. Wall Type: DUAL-WALL. 1x Heat Shrink Tubing As your choose.
Do not overheat the tubing, you can compromise it! Do not use tubing which has been overheated! Read and obey all safety instructions for operation of the heat source you choose to utilize when heating the tubing.
Latex Free Contra Angles 105°. We strive to exceed all your expectations and put a smile on your face. Your experience will be a pleasant and effortless one when you buy form us. City,State:BEIJING,China.
Eliminates the problem of 3:1 and 2:1 tubing not shrinking tight enough. 446 Pcs (4:1 Ratio. Made of PE material, the electrical shrink tubes is waterproof and insulated, ensuring electricity safety for you. ).
0.5mm-40mm 1.7:1 / 4:1 PTFE Schrumpfschlauch 1.3:1 FEP Heatshrink Schlauch Clear. Product Material: Φ0.5mm-φ15mm Is PTFE, High Temperature Resistance 260℃, Shrinkage Ratio 1.7:1; Φ16mm and Above Size Is Fep (F46), High Temperature Resistance 200℃, Shrinkage Ratio 1.3:1.
Shrink ratio 1.7:1 & 4:1HIgh Flame retardantExcellent chemical resistanceOperating temperature range -70°C to + 260°CMinimum shrink temperature is 340°C (+/- 5°C).Agency AMS 3584, 3585Military The major uses of this material are for electrical insulation, protection of electronic components and the covering of hydraulic hose and coupling preventing contamination and corrosion. The high mechanical strength and extremely low coefficient of friction make it ideal for reducing damage to bearing shafts, etc. Hilltop PTFE heat shrink tubing is manufactured from polytetrafluoroethylene, an excellent high temperature covering and insulation material. Has added advantages of thin wall high shrink ratio, greater flexibility and transparency in application. Can be used within the medical industry.It is highly flame retardant and exhibits outstanding chemical and solvent resistance with electrical characteristics which remain stable over a wide temperature range. The operating temperature ranges from -70°C to +260°C and up to +400°C for short periods.
Hilltop PTFE heat shrink tubing is manufactured from polytetrafluoroethylene, an excellent high temperature covering and insulation material. Shrink ratio 1.7:1 & 4:1. Minimum shrink temperature is 340°C (+/- 5°C).
Shrink ratio 1.7:1 & 4:1HIgh Flame retardantExcellent chemical resistanceOperating temperature range -70°C to + 260°CMinimum shrink temperature is 340°C (+/- 5°C).Agency AMS 3584, 3585Military The major uses of this material are for electrical insulation, protection of electronic components and the covering of hydraulic hose and coupling preventing contamination and corrosion. The high mechanical strength and extremely low coefficient of friction make it ideal for reducing damage to bearing shafts, etc. Hilltop PTFE heat shrink tubing is manufactured from polytetrafluoroethylene, an excellent high temperature covering and insulation material. Has added advantages of thin wall high shrink ratio, greater flexibility and transparency in application. Can be used within the medical industry.It is highly flame retardant and exhibits outstanding chemical and solvent resistance with electrical characteristics which remain stable over a wide temperature range. The operating temperature ranges from -70°C to +260°C and up to +400°C for short periods.
Material: PTFE. Model: Heat Shrink Tube. Start shrink temperature: 150 ℃. Shrink ratio: 1.7:1 ， 4: 1. Full shrink temperature: ≥350 °C.
ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
0,50mm (4,50 kg/m²)
LARGURA – 1.050 mm
TELHA + TELHA EPS 30mm + TELHA
ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
0,50mm (4,50 kg/m²)
LARGURA – 1.050 mm
TELHA + TELHA EPS 30mm
ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
0,50mm (4,50 kg/m²)
LARGURA – 1.050 mm
TELHA + TELHA EPS 30mm
ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
0,50mm (4,50 kg/m²)
LARGURA – 1.050 mm
TELHA + TELHA EPS 30mm + FILME ACARTONADO
ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
0,50mm (4,50 kg/m²)
LARGURA – 1.050 mm
ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
0,50mm (4,50 kg/m²)
LARGURA – 1.050 mm
ESPESSURAS – 0,43mm e 0,50mm
DIMENSÕES – 1.250 mm X 2.000 mm
1.250 mm X 3.000 mm
ESPESSURAS – 0,43mm e 0,50mm
DIMENSÕES – 1.250 mm X 2.000 mm
1.250 mm X 3.000 mm
ESPESSURAS – 0,43mm e 0,50mm
DIMENSÕES – 200 / 300 / 350 / 400 / 500 / 600 / 800 / 900 / 1.200
COMPRIMENTOS – 42m / 84m
