Material Handling

20 ft 10/3 NM-B WG Wire/Cable Non-Metallic

BRAND NEW WIRE CUT OFF ORIGINAL REELApplication: Type NM-B (non-metallic 90° C) typically used in indoor applications inside wall cavities and attics. Please see Article 334 of the National Electrical Code (NEC) for further applications.Construction: 3 conductor, 10 gauge solid construction has the insulated conductors (Black, Red and White) parallel. The ground wire is wrapped with fire-retardant paper and laid parallel between the insulated conductors. Ground wire is 10 gauge solid. The entire construction is wrapped with a paper separator before applying the jacket which is orange on 10 gauge NM-B. PVC (polyvinyl chloride) jacket is applied over the complete assembly. Conductors: Stranded conductors are soft, uncoated copper per ASTM B3.Standards: UL 719: E9810 UL 83: E15119 ASTM B3*It is the sole responsibility of you, the buyer to determine suitability of this product for its intended use and application.We cannot accept returns on cut wire unless we have made a mistake in the cut, shipped the wrong item, or if the wire is defective in any way. This is a brand new domestic made wire. We buy from reputable wire companies who stand behind their product.Thank you for looking. Please visit my store for more wire types and sizes.(WE SHIP WITHIN 1 DAY AFTER YOU PLACE YOUR ORDER. We can not guarantee the delivery date. Only the ship date. If quicker delivery is needed, please contact us before you place your order.)

Read More...

20 ft 12/2 UF-B WG Underground Feeder Direct Burial Wire/Cable

BRAND NEW WIRE CUT OFF ORIGINAL REELUnderground Feeder and Branch Circuit Cable. 600 Volt. Copper Conductors. Sunlight and Moisture Resistant. Applications: Copper UF-B cable is generally used as a circuit to outside loads. It may be used underground, including direct burial. Multiple conductor UF-B cable may be used for interior branch circuit wiring in residential or agricultural buildings at conductor temperatures not to exceed 90°C (with ampacity limited to that for 60°C conductors) as specified by the National Electrical Code. UF-B can be used in applications permitted for NMC in Section 334. 10(B) of the National Electrical Code. Voltage rating for UF-B cable is 600 volts. Standards & References: ASTM – B3 and B-8 UL Standard 83 UL Standard 493 Federal Specification A-A-59544 National Electrical Code, NFPA 70, 2011 Edition RoHS/ REACH Construction: Manufactured as a 2 or 3 conductor cable with ground wire. Copper conductors are annealed (soft) copper, solid of compressed stranded. Phase conductors are polyvinyl chloride (PVC) insulated, nylon jacketed, color coded for identification purposes. Jacketed with sunlight and moisture resistant gray PVC. Made in the USA We can’t accept returns on cut wire unless we have made a mistake in the cut, shipped the wrong item, or if the wire is defective in any way. This is brand new wire. We buy from reputable wire companies who stand behind their product. Thank you for looking. Please visit my store for more wire types and sizes. (WE SHIP WITHIN 1 DAY AFTER YOU PLACE YOUR ORDER. We can not guarantee the delivery date. Only the ship date. If quicker delivery is needed, please contact us before you place your order.)

Read More...
Telhas Termoacústicas

TELHA SANDUÍCHE

Aluzinco / Galvalume

ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
              0,50mm (4,50 kg/m²)

LARGURA – 1.050 mm

TELHA + TELHA EPS 30mm + TELHA

Telhas Termoacústicas

TELHA FACE TELHA

Aluzinco / Galvalume

ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
              0,50mm (4,50 kg/m²)

LARGURA – 1.050 mm

TELHA + TELHA EPS 30mm

Telhas Termoacústicas

TELHA FACE LISA

Aluzinco / Galvalume

ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
              0,50mm (4,50 kg/m²)

LARGURA – 1.050 mm

TELHA + TELHA EPS 30mm

Telhas Termoacústicas

TELHA FACE LISA com filme

Aluzinco / Galvalume

ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
              0,50mm (4,50 kg/m²)

LARGURA – 1.050 mm

TELHA + TELHA EPS 30mm + FILME ACARTONADO

Telhas TP40 de Qualidade

TELHA TRAPEZOIDAL TP40

Aluzinco / Galvalume

ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
              0,50mm (4,50 kg/m²)

LARGURA – 1.050 mm

Telhas TP40 de Qualidade

TELHA ONDULADA

Aluzinco / Galvalume

ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
              0,50mm (4,50 kg/m²)

LARGURA – 1.050 mm

Chapas de Qualidade

CHAPA ZINCADA

Zincada

ESPESSURAS – 0,43mm e 0,50mm
DIMENSÕES – 1.250 mm X 2.000 mm
                         1.250 mm X 3.000 mm

Chapas de Qualidade

CHAPA ALUZINC / GALVALUME

Aluzinco / Galvalume

ESPESSURAS – 0,43mm e 0,50mm
DIMENSÕES – 1.250 mm X 2.000 mm
                         1.250 mm X 3.000 mm

Chapas de Qualidade

BOBININHAS E SLITTERS

Aluzinco / Galvalume e Zincadas

ESPESSURAS – 0,43mm e 0,50mm
DIMENSÕES – 200 / 300 / 350 / 400 / 500 / 600 / 800 / 900 / 1.200
COMPRIMENTOS – 42m / 84m