Image is Representational – See Manufacturer Specs | Online Components is an Authorized MICROTRAN Distributor
After we receive the item back at our facility, we will confirm that the item is indeed ours and defective. After we make our confirmations then we will replace the defective item with an equivalent item.
After we receive the item back at our facility, we will confirm that the item is indeed ours and defective. After we make our confirmations then we will replace the defective item with an equivalent item.
You are buying one used DYWER/ AIR MONITOR CORPORATION M-1419 Magnehelic GAGE 0-12 M3/MN, M/MINXX100. Loc:BMXXX 153E.
FOR YOUR CONSIDERATION: 2-1/2″ Black Rubber Cap S1419Q8 All items come as shown. If it is included in this listing, it’s shown in the photos. Please check them carefully. Location: AM-2 *PLEASE READ* We cannot guarantee that this part will fit your application, only an authorized dealership can do that. We have listed all model information that we have available. We strive to provide all information that we have on hand and do our best to describe and photograph every part. Please make sure that this is the correct part that you need BEFORE you buy. The best way to do this is to call a dealership and have them verify that this is the appropriate part number for your application. *THE FREE SHIPPING OFFER APPLIES TO THE CONTINENTAL UNITED STATES ONLY. RESIDENTS OF ALASKA, HAWAII AND PUERTO RICO WILL NEED TO EMAIL US FOR AN ACCURATE SHIPPING QUOTE * TERMS The overwhelming majority of what we sell is surplus from large companies or governments. If we say the item works, then it was tested to the best of our ability. All items and contents are described to the best of our ability. We examine all items and supply all available make/model information. We will try to answer all questions in a timely manner. PAYMENT All payment is due immediately with the “Buy It Now” feature. All payments are processed for fulfillment immediately, through PayPal’s policy. If you pay by PayPal, we will ONLY ship to the PayPal confirmed or approved shipping address that you choose at the time of payment. SHIPPING & HANDLING For normal orders, orders ship between 1 to 3 business days after payment is made. We cannot control shipping time after we ship. Most itmes are shipped through USPS, with a tracking number. If an item ships via any other method, shipping/tracking information, as well as the carrier will be provided. INTERNATIONAL SHIPPING We do offer International (Worldwide) shipping. All international buyers will need to contact us with their shipping information for an accurate shipping quote prior to purchase. *RETURNS* We offer free returns on anything that arrives damaged or non-functional for 30 days after the date of receipt. We do not offer free returns if something doesn’t fit, or you changed your mind. In those cases, you will be required to pay for return shipping, as well as a return to stock fee. We do NOT accept returns on written/printed material or software/computer games. There are NO exceptions to this rule. Please be aware of that prior to purchase. MF
Show signs of shelf wear. OnlineSemi LLC.
Tech Etch Cage 64411 EMI Mesh Shielding Gasket 50 FT
2984XH3E.03 New Parker Chomerics Cho-Seal EMI (Electro-Magnetic Interference) Die Cut Shield Patch Dots, Made of Nickel Plated Carbon (Ni/C) Fiber Shielding Matrix, Part Number 19-11-19907-S6305. Each bid quantity is for a Lot of One Hundred (100) EMI Patch Dots. You may bid / buy any number of lots, up to the total quantity available above. These were purchased at an industrial liquidation earlier this year, and they were in the original factory bags. We packaged them in heavy Ziplok bags for resale. They seem to be some kind of peel-and-stick dots. However, the white side does not peel off very easily – if at all. On most pieces we tested, it is *very* firmly attached, and when it does finally tear, it shreds into fibers sort of like Tyvek. The silicone is soft and pliable, but the adhesive is probably out of date (August 2005). We therefore recommend that you simply dab on a suitable liquid adhesive, and bond the EMI patch to your surface. Should be just the thing for screw holes and other small EMI leaks. The part number 19-11-19907-S6305 breaks down as follows: 19-11: Die cut product 19907: Parker internal drawing number S6305: Material Ni/C (Nickel plated carbon fiber) According to the calipers: Diameter: .379″ / 9.64 mm Thickness (including white backing): .029″ / 0.74 mm Thickness (including white backing): .024″ / 0.61 mm According to the manufacturer: S6305 — Good performance in moderately corrosive environments; material of choice for flange finishes needing “bite-through” for good electrical contact. Molded (M) or Extruded (E) — M/E Conductive Filler — Ni/C Elastomer Binder — Silicone Type (Ref. MIL-DTL-83528) — Not Applicable Volume Resistivity, ohm-cm, max., as supplied without pressure sensitive adhesive CEPS-0002 C(Q/C) 0.100 MIL-DTL-83528 (Q/C) Not Applicable Hardness, Shore A ASTM D2240 (Q/C) 65 ± 10 Specific Gravity ASTM D792 (Q/C) 2.00 ± 0.25 Tensile Strength, psi (MPa), min. ASTM D412 (Q/C) 200 (1.38) Elongation, % min. or % min./max. ASTM D412 (Q/C) 100 Tear Strength, lb/in. (kN/m), min. ASTM D624 (Q) 50 (8.75) Compression Set, 70 hrs at 100°C,% max. A ASTM D395, Method B (Q) 30 Thermal Low Temperature Flex TR10, °C, min. ASTM D1329 (Q) -45 Maximum Continuous Use Temperature, °C B — 150 Thermal Conductivity, W/m-K (Typical) 300 psi (2.07 MPa) ASTM D5470 0.8 Electrical Shielding Effectiveness, dB, min. F Method 1: CHO-TM-TP08 C(Q) Method 2: MIL-DTL-83528 Para.4.6.12 (Q) Method 3: CHO-TM-TP09 C (Q) Method 1 200 kHz (H Field) Not Tested 100 MHz (E Field) 100 500 MHz (E Field) 100 2 GHz (Plane Wave) 100 10 GHz (Plane Wave) 100 40 GHz (Plane Wave) 75 Electrical Stability, ohm-cm, max. Heat Aging CEPS-0002 C (Q) 0.250(E) MIL-DTL-83528 Para 4.6.15 (Q/C) Not Applicable Resistance During Vibration MIL-DTL-83528 Para 4.6.13 (Q) Not Applicable Resistance After Vibration MIL-DTL-83528 Para 4.6.13 (Q) Not Applicable Post Tensile Set Volume Resistivity MIL-DTL-83528 Para 4.6.9 (Q/C) Not Applicable Regulatory EMP Survivability, kA per in. perimeter MIL-DTL-83528 Para 4.6.16 (Q) Not Applicable RoHS Compliant — Yes UL 94 Flammability Rating — HB We used to have a link to the manufacturer’s site providing additional information, however, eBay made us remove it. The noose slowly tightens…
ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
0,50mm (4,50 kg/m²)
LARGURA – 1.050 mm
TELHA + TELHA EPS 30mm + TELHA
ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
0,50mm (4,50 kg/m²)
LARGURA – 1.050 mm
TELHA + TELHA EPS 30mm
ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
0,50mm (4,50 kg/m²)
LARGURA – 1.050 mm
TELHA + TELHA EPS 30mm
ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
0,50mm (4,50 kg/m²)
LARGURA – 1.050 mm
TELHA + TELHA EPS 30mm + FILME ACARTONADO
ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
0,50mm (4,50 kg/m²)
LARGURA – 1.050 mm
ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
0,50mm (4,50 kg/m²)
LARGURA – 1.050 mm
ESPESSURAS – 0,43mm e 0,50mm
DIMENSÕES – 1.250 mm X 2.000 mm
1.250 mm X 3.000 mm
ESPESSURAS – 0,43mm e 0,50mm
DIMENSÕES – 1.250 mm X 2.000 mm
1.250 mm X 3.000 mm
ESPESSURAS – 0,43mm e 0,50mm
DIMENSÕES – 200 / 300 / 350 / 400 / 500 / 600 / 800 / 900 / 1.200
COMPRIMENTOS – 42m / 84m
