Light Equipment & Tools

25 Feet Chomerics 1285 EMI Gasket Material .062 x .100 Electro Conductive Rubber

2489XF1C.13 New Chomerics (by Parker Hannifin) Cho-Seal EMI Shield Gasket Material, .062″ x .100″ Conductive Elastomer, Part Number 10-05-4699-1285. Each bid quantity is for One (1) Bag Containing Twenty-Five (25) Linear Feet. You may bid / buy any number of bags, up to the total quantity available above. This was purchased at an electronics supplier liquidation earlier this year, and it was brand new on the original factory spools. We measured it and repackaged in heavy Ziplok bags for resale. Chomerics 1285 is made with a silicone rubber elastomer that is impregnated with finely powdered Silver and Aluminum metal during the manufacturing process. This gives it some interesting properties, such as conducting electricity and providing shielding against electromagnetic interference. It is noticeably heavier than ordinary silicone rubber, but it is not as stretchy. Hardness is around Shore 65 (+/-7). We used to have a link to the manufacturer’s site providing additional information, however, eBay made us remove it. The noose slowly tightens… Note: About 95% of these bags should be one full, unbroken 25′ piece of material. We did, however, have a few bags with broken pieces that got mixed in with the others (about 15 out of 300 bags). We will try to pull out any bags with “extra ends” as we ship them, but one could occasionally get through. According to the calipers Length: 25 Linear Feet Cross section: .100″ / 2.54mm x .062″ / 1.58mm (rectangular)

Read More...
Telhas Termoacústicas

TELHA SANDUÍCHE

Aluzinco / Galvalume

ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
              0,50mm (4,50 kg/m²)

LARGURA – 1.050 mm

TELHA + TELHA EPS 30mm + TELHA

Telhas Termoacústicas

TELHA FACE TELHA

Aluzinco / Galvalume

ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
              0,50mm (4,50 kg/m²)

LARGURA – 1.050 mm

TELHA + TELHA EPS 30mm

Telhas Termoacústicas

TELHA FACE LISA

Aluzinco / Galvalume

ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
              0,50mm (4,50 kg/m²)

LARGURA – 1.050 mm

TELHA + TELHA EPS 30mm

Telhas Termoacústicas

TELHA FACE LISA com filme

Aluzinco / Galvalume

ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
              0,50mm (4,50 kg/m²)

LARGURA – 1.050 mm

TELHA + TELHA EPS 30mm + FILME ACARTONADO

Telhas TP40 de Qualidade

TELHA TRAPEZOIDAL TP40

Aluzinco / Galvalume

ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
              0,50mm (4,50 kg/m²)

LARGURA – 1.050 mm

Telhas TP40 de Qualidade

TELHA ONDULADA

Aluzinco / Galvalume

ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
              0,50mm (4,50 kg/m²)

LARGURA – 1.050 mm

Chapas de Qualidade

CHAPA ZINCADA

Zincada

ESPESSURAS – 0,43mm e 0,50mm
DIMENSÕES – 1.250 mm X 2.000 mm
                         1.250 mm X 3.000 mm

Chapas de Qualidade

CHAPA ALUZINC / GALVALUME

Aluzinco / Galvalume

ESPESSURAS – 0,43mm e 0,50mm
DIMENSÕES – 1.250 mm X 2.000 mm
                         1.250 mm X 3.000 mm

Chapas de Qualidade

BOBININHAS E SLITTERS

Aluzinco / Galvalume e Zincadas

ESPESSURAS – 0,43mm e 0,50mm
DIMENSÕES – 200 / 300 / 350 / 400 / 500 / 600 / 800 / 900 / 1.200
COMPRIMENTOS – 42m / 84m