Working Speed：≤ 0.5m/s. Working Pressure: ＜ 40Mpa. Shore Hardness : 90A±2.
U-Cup Hydraulic ram seal u seal rod & piston working Cylinder 10mm-100mm rod od.
Model: UN, UHS, UNS. The U-shaped Y-shaped seal ring is the most commonly used oil seal in hydraulic cylinders and is a typical lip seal. In low-pressure conditions, sealing can only be achieved through interference deformation of the lip.
UN/UNS/UHS PU U-cup Piston Hydraulic Rod Oil Seal Rings ID 6-175mm Height 5-12mm. All of our seals are made of new and high quality raw materials! 3, allowing a larger extrusion gap.
Special reminder: UN/UHS/UNS is a dual-use shaft hole seal, inside and outside the lip as high as the physical green or blue, can not specify the colour, I am very sorry! Material: polyurethane.
Working Speed：≤ 0.5m/s. Working Pressure: ＜ 40Mpa. Color: Blue, Green (Sent Randomly). Material : PU.
🀅【Wide Application】- Applied to industrial hydraulic cylinders and cylinders, hoists, moving rods of guide rods, and piston rods (pull rods), and pistons (one-way piston seals) in static pressure. 🀅 Material: Polyurethane (PU), Shore 90A.
🀅【Wide Application】- Applied to industrial hydraulic cylinders and cylinders, hoists, moving rods of guide rods, and piston rods (pull rods), and pistons (one-way piston seals) in static pressure. 🀅 Material: Polyurethane (PU), Shore 90A.
Description: This universal narrow section hydraulic seal is made of black nitrile rubber, has a durometer of 90.For use across a wide temperature range from -22 degrees F (-30 degrees C) to 212 degrees F (100 degrees C).For hydraulic and reciprocating environment. Specifications:Inner Diameter: 25mm / 0.98-inch Diameter: 33mm / 1.30-inchHeight: 5mm / 0.2-inchWorking Pressure: <16MPAWorking Temperature Range: -22 degrees F (-30 degrees C) to 212 degrees F (100 degrees C).
ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
0,50mm (4,50 kg/m²)
LARGURA – 1.050 mm
TELHA + TELHA EPS 30mm + TELHA
ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
0,50mm (4,50 kg/m²)
LARGURA – 1.050 mm
TELHA + TELHA EPS 30mm
ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
0,50mm (4,50 kg/m²)
LARGURA – 1.050 mm
TELHA + TELHA EPS 30mm
ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
0,50mm (4,50 kg/m²)
LARGURA – 1.050 mm
TELHA + TELHA EPS 30mm + FILME ACARTONADO
ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
0,50mm (4,50 kg/m²)
LARGURA – 1.050 mm
ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
0,50mm (4,50 kg/m²)
LARGURA – 1.050 mm
ESPESSURAS – 0,43mm e 0,50mm
DIMENSÕES – 1.250 mm X 2.000 mm
1.250 mm X 3.000 mm
ESPESSURAS – 0,43mm e 0,50mm
DIMENSÕES – 1.250 mm X 2.000 mm
1.250 mm X 3.000 mm
ESPESSURAS – 0,43mm e 0,50mm
DIMENSÕES – 200 / 300 / 350 / 400 / 500 / 600 / 800 / 900 / 1.200
COMPRIMENTOS – 42m / 84m
