Shrink Ratio : 3:1. Size : 1/4″ – ( 6.4mm). Color :RED.
We are based in the USA, and have super fast shipping times (don’t take our word for it, check out our feedback). Samples are available, for all of our sizes and colors listed, with purchase.If you would like a color/size not listed, please message us, pricing to be determined by what is needed. This listing is for 25 continuous feet of 1/4″ black in color 3:1 dual wall adhesive heat shrink. Can also mix and match all of the dual wall heat shrink, as long as the total is 25 feet. Black Dual-Wall Adhesive-Lined Heat Shrink Tubing. This product has a 3:1 shrink ratio. Manufactured by co-extrusion of irradiated cross-linking polyolefin and specifically designed hot melt adhesive, this tubing may be used in a wide variety of applications, including back end connector sealing, breakout and connector to cable transitions and a variety of other automotive, and marine uses. High expansion ratio makes it possible to repair most damaged cable jackets without removing connectors. Please note that all ebay items purchased from me will have complimentary insurance on the item for the value purchased. Additionally if the purchased item is used, changed condition, has been altered, quantity sold has been altered, or any other variation from the listing full returns are not available, partial refunds are subject to what has changed.
The double-wall construction is lined internally with adhesive to create a marine-grade waterproof seal, and includes anti-stick tape for a non-adhesive interior surface. Safe & Eco-Friendly – UL Listed for up to 600 volts.
You will receive 1 foot (12 inches) BLACK 1/4″(6.4mm) ID tubing, per quantity ordered. Tubing is sized by ID (inner diameter) (*ROUND MEASUREMENT) If you need longer pieces please message me before buying and I will direct you Made of premium Polyethylene (a high-quality type of polyolefin produced by polymerizing the olefin ethylene)Matte finish, professional appearance – not shiny like some cheaper PVC products3 to 1 shrinkage ratio; will shrink to one third of the stated diameterDual wall adhesive lined; when heated, the inner glue lining will melt and seal your wires to waterproof and protect themAll stated diameters are internal measurements when the tubing is round, not when flatThere is no printing on this tubing
Part Number: EL-6.4MM-AHSRED-3.5 BoltsandNuts.com Shop high quality 3:1 Adhesive Lined Marine Grade Heat Shrink Tubes at Wholesale Prices. Available by the Piece, Package, & Bulk. No Order Minimums!
You will receive 1 foot (12 inches) RED 1/4″(6.4mm) ID tubing, per quantity ordered. Tubing is sized by ID (inner diameter) (*ROUND MEASUREMENT) If you need longer pieces please message me before buying and I will direct youMade of premium Polyethylene (a high-quality type of polyolefin produced by polymerizing the olefin ethylene)Matte finish, professional appearance – not shiny like some cheaper PVC products3 to 1 shrinkage ratio; will shrink to one third of the stated diameterDual wall adhesive lined; when heated, the inner glue lining will melt and seal your wires to waterproof and protect themAll stated diameters are internal measurements when the tubing is round, not when flatThere is no printing on this tubing
30PCS Piggyback Quick Disconnects 12-10AWG Wire Spade Connectors Male/Female US. 1-15 Sets Waterproof 18AWG Wire Connector Male Female 3-Pin Plug for Car Boat. 4 ft Marine Heat Shrink Tubing Φ2″ (50mm) 3:1 Ratio Dual Wall Adhesive Lined US.
1/4″ 6.4 mm 3:1 Heat Shrink Tubing. The tough outer jacket protects against abrasion, vibration and flexing. 3:1 Heat Shrink Heavy Wall Tube. Adhesive Lined Dual Wall. Length of each tube : 6″ 15.2cm.
1/4″ / 6.4mm I.D – Premium 3:1 Dual Wall Adhesive Lined Heat Shrink – 6″ Sections – Red. Red Adhesive Lined Dual Wall Heat Shrink. 3:1 Shrink Ratio (shrinks to 1:3 the size). Before Shrink I.D Size – 0.250″ / 6.4mm.
Shrink Ratio : 3:1. Size : 1/4″ – ( 6.4mm). Color : Red.
ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
0,50mm (4,50 kg/m²)
LARGURA – 1.050 mm
TELHA + TELHA EPS 30mm + TELHA
ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
0,50mm (4,50 kg/m²)
LARGURA – 1.050 mm
TELHA + TELHA EPS 30mm
ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
0,50mm (4,50 kg/m²)
LARGURA – 1.050 mm
TELHA + TELHA EPS 30mm
ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
0,50mm (4,50 kg/m²)
LARGURA – 1.050 mm
TELHA + TELHA EPS 30mm + FILME ACARTONADO
ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
0,50mm (4,50 kg/m²)
LARGURA – 1.050 mm
ESPESSURAS – 0,43mm e 0,50mm
PESO – 0,43mm (3,90 kg/m²)
0,50mm (4,50 kg/m²)
LARGURA – 1.050 mm
ESPESSURAS – 0,43mm e 0,50mm
DIMENSÕES – 1.250 mm X 2.000 mm
1.250 mm X 3.000 mm
ESPESSURAS – 0,43mm e 0,50mm
DIMENSÕES – 1.250 mm X 2.000 mm
1.250 mm X 3.000 mm
ESPESSURAS – 0,43mm e 0,50mm
DIMENSÕES – 200 / 300 / 350 / 400 / 500 / 600 / 800 / 900 / 1.200
COMPRIMENTOS – 42m / 84m
